페이지 이력

버전 비교

키

이 줄이 추가되었습니다.
이 줄이 삭제되었습니다.
서식이 변경되었습니다.

Sv translation

language	ko_KR

이문서는 Sync Playlist를 만드는 방법에 대해 설명합니다.

다음 예제와 같이 서로 나란히 배치된 3개의 디스플레이에 분할된 다른 광고 또는 정보의 이미지/비디오를 표시한다고 가장합니다.

예시 1 : 디스플레이상의 광고

모든 광고를 올바르게 표시하려면 모든 장치가 모든 디스플레이에 하나의 특정 광고의 내용을 표시해야합니다.

따라서 디스플레이는 서로 동기화되어야 합니다.

예시 2: 캠퍼스의 방향 안내

캠퍼스의 도로에서 사람들을 안내하기 위해, 여러 디스플레이를 조합하여 방향과 설명을 보여줄 수 있습니다.

디스플레이와 관련된 정보가 방향과 일치해야 합니다.

예시 3 : 동물들에 대한 전자사전 안내

한 그룹의 장치들이 동물원안에 있는 동물의 정보와 사진을 표시하는데 사용될 수 있습니다.

적절한 정보를 표시하려면 동물의 이미지가 정보와 적절하게 일치해야 합니다.

위의 모든 예시에서 우리는 모든 디스플레이의 내용을 동기화하여 콘텐츠가 원활하게 통합되기를 원합니다.

디스플레이중 하나에서 전환이 발생하면 모든 장치에서도 동시에 전환이 발생해야 합니다. 동기화된 재생 목록은 우리가 쉽게 할 수 있도록 도와줍니다.

위의 첫번째 예시(광고)에 대해 동기화된 재생 목록을 만들기 위해 다음 절차를 수행하세요.

Sync Play Playlist 생성하기

먼저 표시되어야 할 이미지/비디오를 세 부분으로 나누어 다른 파일로 저장합니다. 이제 컨텐츠메뉴를 클릭하고 만들어진 이미지/비디오 파일을 업로드 합니다.
업로드가 완료되면 특정 미디어 태그가 있는 이미지가 특정장치에 표시되도록 미디어 태그를 컨텐츠에 할당합니다.
1. 장치1 패널(첫번째 패널)에 표시될 모든 컨텐츠를 선택한 후, 다중 편집을 클릭합니다.
2. 이제 미디어 태그 메뉴에서 태그(예:Tag-01)를 선택하고 저장을 클릭합니다.
  장치1에 표시되어야 하는 모든 이미지에 Tag-01이 할당되어 있는지 확인합니다.
  다른 모든 장치 및 연관된 태그 (예: 장치2의 Tag-02, 장치3의 Tag-02)에 대해 에 대해 작업을 수행하십시오.
이제 장치메뉴로 이동하여 장치그룹을 선택하고 아래 그림과 같이 콘텐츠에 할당된 태그에 따라 각 장치에 하나의 미디어 태그를 할당합니다.
장치의 태그를 선택한 다음 적용을 클릭합니다.
그룹의 다른 모든 장치에 다른 태그를 할당합니다. 본 예제에서는 장치1에 Tag-01, 장치2에 Tag-02, 장치3에 Tag-03을 할당했습니다.
모든 컨텐츠에 태그를 성공적으로 할당한 후, 오른쪽에 있는 Playlist 을 선택한 다음 New Playlist를 클릭합니다.
Under Supported Devices, select the model type of your device from the list of supported devices.
Then from the dropdown menu under the Playlist Type, select Sync Play. Click on Create.
Now, on the right hand side of the screen, select the checkbox templates under both the groups and click on Delete as shown in the following image.
Now we can add fresh content in our groups

Now we will customize the number of groups and content count for our playlist as shown below.

In our example, we would need 3 groups of playlists. So, click on the Add Group to create the third group.
Uncheck the sync button.
Now, select the Filter Icon located over the contents and filter your content by tags.

Select Tag-01 under the Media Tag and click on View.
Drag and drop the Tag-01 content from the left side of the screen and add them to Group 1 one by one. Repeat this for other Tags and Groups (Tag-02 content to Group 2 and Tag-03 content to Group 3).
Maintain the same sequence of advertisement in each group. Now each group contains the set of images that a particular device shall display.

정보
In general, assign the same types of content files to playlist groups to which to synced playback. For example, if the first content file in playlist group 1 is an image file, the first content file in playlist group 2 must also be an image file.

After doing this, your groups should look like following image. Set the content duration (5 sec). Click on Save on the top left corner of the screen.
Give your playlist a name and a group and finally click on Save.
Now, to create a schedule of the playlist, click on Schedule on the left tab, click on New Schedule and select Content.
Select your device type and schedule type as Sync Play.
Click Select button to select the group in which you want to publish.
Select the group and click Save.
Click create.
Select Playlist option from left top button as shown in figure.
Select the playlist you created. ‘Associate Tag’ pop-up will appear.
Associate the same Tag to sync groups, which you have used to create that group.
E.g– As we have created group 1 by filtering the data using tag1 drag and drop the tag 1 in front of group 1.
Click on Save.
Double click on dropped item and select the period of publishing. Click “Save”.
Click on Save Button.
Save & Publish the Schedule to Devices.

Sv translation

language	en

This document describes how to create a synchronized playlist.

Suppose we want to display images/video of different advertisements or information split across 3 displays placed alongside each other as shown in the following examples:

EXAMPLE 1: ADVERTISEMENTS ON A DISPLAY

In order to display all the advertisements properly, all the devices should display the content of one particular advertisement across all the displays.

Hence, the displays are required to be in sync with each other.

EXAMPLE 2: DIRECTIONS INSIDE A CAMPUS

For guiding people on road in a campus, one can use such a combination of displays to show the directions and their description.

It is necessary that information pertaining to a display should appear in sync with the directions

EXAMPLE 3: DIGITAL ENCYCLOPEDIA OF ANIMALS IN A ZOO

A group of devices can be used to display information and pictures of animals inside a zoo.

In order to display appropriate information, it is necessary that the image of the animal changes in proper sync with its information.

In all the examples above, we saw that we would want the content on all the displays to be synced so that our content seams smoothly.

If a transition occurs on one of the display, in order to maintain the timing sequence on all the devices, the transition should occur at the same time. A synced playlist helps us do it easily.

Let us create a synced playlist for the first example above(advertisements). To create a synced playlist, follow these steps:

Creating Sync Play Playlist

First of all, trim the images/videos that need to be displayed into three portions and save them as different files. Now, click on Contents tab and upload all the pre-cut images/videos files.
Once uploading is finished, assign media tags to the content such that images with a particular media tag are displayed on a particular device.
1. Select all the content that we want to display on the Device1 panel (first panel) and then click on Edit Multiple.
2. Now, under the Media Tag section, select a tag (say Tag-01) and click on Save.
  Make sure that all the images that need to be displayed on Device1 are assigned Tag-01.
  Do this for all other media and their respective tags (i.e. Tag-02 for Device2 media and Tag-03 for Device3 media)
Now, go to the Devices tab, select your group of devices and assign one media tag each to every device as per the Tags assigned to the content as shown below.
Select a tag for a device and then click on Apply.
Assign different tags to all other devices in the group. In our example, we have assigned Tag-01 to Device1, Tag-02 to Device2 and Tag-03 to Device3.
After assigning tags to all your content successfully, select Playlist on the right side and then click on New Playlist.
Under Supported Devices, select the model type of your device from the list of supported devices.
Then from the dropdown menu under the Playlist Type, select Sync Play. Click on Create.
Now, on the right hand side of the screen, select the checkbox templates under both the groups and click on Delete as shown in the following image.
Now we can add fresh content in our groups

Now we will customize the number of groups and content count for our playlist as shown below.

In our example, we would need 3 groups of playlists. So, click on the Add Group to create the third group.
Uncheck the sync button.
Now, select the Filter Icon located over the contents and filter your content by tags.

정보
In general, assign the same types of content files to playlist groups to which to synced playback. For example, if the first content file in playlist group 1 is an image file, the first content file in playlist group 2 must also be an image file.

After doing this, your groups should look like following image. Set the content duration (5 sec). Click on Save on the top left corner of the screen.
Give your playlist a name and a group and finally click on Save.
Now, to create a schedule of the playlist, click on Schedule on the left tab, click on New Schedule and select Content.
Select your device type and schedule type as Sync Play.
Click Select button to select the group in which you want to publish.
Select the group and click Save.
Click create.
Select Playlist option from left top button as shown in figure.
Select the playlist you created. ‘Associate Tag’ pop-up will appear.
Associate the same Tag to sync groups, which you have used to create that group.
E.g– As we have created group 1 by filtering the data using tag1 drag and drop the tag 1 in front of group 1.
Click on Save.
Double click on dropped item and select the period of publishing. Click “Save”.
Click on Save Button.
Save & Publish the Schedule to Devices.

Content

공간 도구

버전 비교

이전 버전 9

새 버전 10

키

Sync Play Playlist 생성하기

Creating Sync Play Playlist